If you are looking for a way to protect your car from rust, then Eastwood Rust Encapsulator is the best solution. The product can be applied to any metal surface with no prep work or sanding necessary and it provides long lasting protection against rust and corrosion. What’s more, this encapsulating paint will not stick to rubber tires like other paints which means that you don’t have to worry about getting stuck in the mud!
What is rust and why does it appear?
Rust is the result of oxidization which occurs when metal comes in contact with water and air. The oxidation process breaks down coatings, paint, etc. exposing the bare metal underneath it to further degradation through corrosion. If left untreated rust can make your car or other vehicle look old and dull making you feel embarrassed each time someone looks at it! Eastwood Rust Encapsulator protects against rust by “encasing” any rusted areas like a suit of armor hence preventing them from spreading to un-rusted portions of your automobile’s body surface! It also helps restore cars that have been neglected for years because its high quality resins will penetrate deeply into original nooks & crannies leaving behind an invisible barrier that doesn’t just mask rust but actually prevents it from happening again!
Eastwood offers an array of automotive restoration parts such as powder coating booths and chemicals used to do professional finish work at home or in your garage like HotCoat® Systems. In addition, they also have replacement body panels and components for classic car restoration projects.
Their Rust Bullet® line of rust treatment products help protect your metal surfaces in all seasons to keep items like doors, sideskirts or hoods looking shiny with a finish that won’t peel even after years of weather exposure! If you are in need of some great tools then check out their selection of degreasing machines which can be used at home on the driveway too. Whatever it is that you may require while working on your project Eastwood has probably got it covered so get started today before rust turns into powdery debris!
Eastwood was founded by Robert E. Kaufman who opened his first location next to his house garage near Cleveland Ohio back in 1978 because he was frustrated by the lack of good options for rust treatment and restoration. Since then Eastwood has expanded to 30 locations worldwide which means that you can easily find a location near your home or work if needed!
The company offers over 16,000 products in their inventory with an emphasis on car & truck restoration parts as well as custom fabrication tools/equipment all at reasonable prices. They also have a vast array of top-quality chemicals used in professional auto body shops across North America so no matter what it is you are looking for this is one place where finding exactly what you need should be easy peasy lemon squeezy (yes we did just say that)!
What is Eastwood Rust Encapsulator?
Do you want your car to stay looking newer for longer? Eastwood Rust Encapsulator can help! This product is easy to use and offers great results without any preparation or sanding necessary. The coating will not stick to rubber tires which means that you don’t have to worry about getting stuck in the mud! Eastwood Rust Encapsulator works on all ferrous metal surfaces including aluminum, steel and galvanized so if there’s any metallic surface on your car or truck then this rust encapsulating paint will take care of it! There are no special tools required as well because Eastwood Rust Encapsulator coats vertical & horizontal areas making sure that everything from door handles to rocker panels get full protection against corrosion. This makes Eastwood a great choice not only for those who want their cars looking newer but also for professional detailers!
Top benefits of Eastwood Rust Encapsulator
- A long lasting solution to protecting your car
- Not stick to rubber tires
- Works on any ferrous metal surface
- Easy to use
Eastwood Rust Encapsulator is a long lasting solution to protecting your car from rust and corrosion. The coating will not stick to rubber tires which means that you don’t have to worry about getting stuck in the mud! Eastwood Rust Encapsulator works on any ferrous metal surface including aluminum, steel and galvanized so if there’s any metallic surface on your car or truck then this rust encapsulating paint will take care of it! There are no special tools required as well because Eastwood Rust Encapsulator coats vertical & horizontal areas making sure that everything from door handles to rocker panels get full protection against corrosion. This makes Eastwood a great choice not only for those who want their cars looking newer but also for professional detailers!
- Can be applied to any metal surface without sanding or prep work
- Has a thick coating that dries quickly
- Prevents rust from returning
- Protects against corrosion
- Shields areas other paint won’t cover such as door handles, rocker panels and engine components
- Works on all ferrous metals including aluminum, steel & galvanized
- No special tools required
- Easy application with an aerosol can
- Will not stick to rubber tires like traditional paints
- Only comes in five color – matte black, silver, gray, white and red
How to use it?
Eastwood Rust Encapsulator is easy to use and there’s no special tools required. Just apply it with an aerosol can after cleaning the rusted area thoroughly! It doesn’t stick to rubber tires so you don’t have to worry about getting stuck in the mud while applying it either! Applying Eastwood Rust Encapsulator will ensure that rust won’t be able to return by forming a thick coating that dries quickly on any ferrous metal surface including aluminum, steel & galvanized. No sanding or other preparation work needed at all – just clean off rusty areas using soap and water then spray on paint until they’re completely covered before waiting for them dry out fully (around 30 minutes). This makes Eastwood one of the best choices for those who want their car or truck to look newer with minimal effort. This product is also great for professional detailers!
Examples of places where you can use this
- Door handles
- Rocker panels
- Engine components
What to look out for when using this product?
For best results, rust areas should be cleaned before applying Eastwood Rust Encapsulator. This way rust won’t have a chance of returning and you’ll get optimal results with minimal effort! No sanding or other preparations necessary, just clean the area with soap and water then apply paint until they’re completely covered. Make sure that all coats are applied as evenly as possible with no missed spots because this is what will determine how well it’s going to protect your car from corrosion in the future! While waiting for each coat to dry, make sure that none of them has any noticeable smudges or runs on the surface as this will compromise the results and you’ll end up with an uneven finish. If applying it to door handles, rocker panels or engine components make sure that you use a gloved hand!
My experirnce using Eastwood Rust Encapsulator
I was hesitant to try Eastwood Rust Encapsulator at first since I had never heard of the brand before, but my friend convinced me that it would be better than basic paint that doesn’t last long. At first I’m not sure what to expect because I didn’t know how long it would take to dry or whether or not it would gum up on the tires like regular paint has a tendency to do.
I found out, however, that there are no special tools required and applying it with an aerosol can makes it easy to coat areas other regular paint just can’t reach! There’s also no prepping required which is great for someone who doesn’t have all of the time in the world. Once I started applying Eastwood Rust Encapsulator, I found that it dries quickly and the thick coating ensures that rust won’t be able to return.
I was surprised by how well it worked for protecting my car from corrosion in the future – no more worrying about whether or not paint will chip! It also works great on all ferrous metals including aluminum, steel & galvanized which is incredibly useful since many paints only work with one type of metal. Another thing I like about this product is that there’s no smudging or runs while waiting for each layer to dry fully (which takes around 30 minutes). This way you can avoid compromising results if applying multiple coats so make sure none has any noticeable smudges before moving on to the next coat.
Why should you use Eastwood Rust Encapsulator instead of other brands?
It’s the best way to ensure that your car or truck looks newer with minimal effort.
Is it safe for those who have sensitive skin?
Yes, there are no special tools required, just spray on and wait until dry before driving off!
Will this work on my wheel wells too?
Yes – apply a couple coats after cleaning thoroughly so rust won’t be able to return. Make sure each layer is evenly applied without any missed spots since this will determine how well it works at protecting your vehicle from corrosion in the future. Avoid smudging & runs while waiting for each layer to dry fully (around 30 minutes).
Does this product come with a warranty?
Yes, Eastwood provides a 60 day money back guarantee if you’re not satisfied. Plus they offer full technical support from an experienced team of technicians that’s available between the hours of 12pm & 11pm EST! In order to process returns, however, proof is required that rust has returned since using their product. If rust hasn’t returned yet please note it may take up to 18 months for your car or truck to show signs but you will be reimbursed once it does occur as long as return guidelines are followed. This way there won’t be any risk on your end and I sure you’ll love how well this product works at protecting your car from corrosion!
Is this product good for those who want a quick fix?
Eastwood Rust Encapsulator is perfect if you need rust protection in less than 30 minutes without any special tools required. The thick coating ensures that none will chip or peel off which means corrosion won’t be able to return so there’s no worrying about your car looking newer again after application – I’m loving it since I always prefer using aerosol spray cans whenever possible because regular paint has a tendency to do exactly what we’re trying to avoid with Eastwood Rust Encapsulator: chipping/peeling over time like during my last road trip. Plus, anyone can apply it with ease so there’s no risk of harming yourself while trying to get it applied evenly and if you’re not satisfied with the results, Eastwood offers a 60 day money back guarantee so I’m sure you’ll love how well this product works at protecting your car!
Conclusion: Should you buy Eastwood Rust Encapsulator?
When it comes to protecting your vehicle from rust and corrosion, Eastwood Rust Encapsulator is a top choice. It protects against ferrous metal surfaces without any sanding needed and has an easy application process with no risk of harming yourself while applying the product. The thick coating ensures that there won’t be any chipping or peeling which means you’ll have peace of mind knowing that your car will stay newer-looking for much longer than other brands! If you’re looking for something quick & easy to protect your vehicle in 30 minutes or less then I recommend trying Eastwood Rust Encapsulator out before it’s too late!