• Skip to primary navigation
  • Skip to main content
  • Skip to footer

RustConverters

Learn How To Remove Rust from Almost Anything

  • Home
  • Guides
  • Removers
  • Converters
  • Protection

Best Rust Converter for the Money: Gempler’s Converter Actually Worked!

June 16, 2021 By Kurt Gorman Leave a Comment

One of the most common questions people ask when they are in need of a rust converter is “which one should I buy?”. It can be difficult to find the right product for your needs in this market, but Gempler’s has been around since 1939 and we have had plenty of time to figure it out. We want to help you with that question by giving you our honest review and feedback on some other products so that you can make an informed decision about which one will work best for your project.

In this article, we’ll discuss what makes Gempler’s really stand out from the competition (hint: it isn’t just low prices), how well their products work, and whether or not it is worth the cost!

Why do I need a rust converter?

Contents show
1 Why do I need a rust converter?
2 What is Gempler’s Rust Converter?
3 How to use the product
4 How long does Gempler’s Rust Converter take to dry?
5 Can you apply body filler over rust converter?
6 Do you wash off rust converter?
7 Who owns Gempler’s
8 The results of using Gempler’s Rust Converter
9 Who should buy this product? Recommendations
10 Overall

Paint is no match for the relentless assault of water, salt, and dirt. As it washes away over time, the metal begins to corrode and rust occurs. It’s important to make sure that you’re using a good quality product as this will protect your investment in new paint jobs or other repairs.

Rust converters are designed specifically for protecting against corrosion on metals such as wrought iron fences, steel doors, dumpsters, and railings among others. They contain an acid solution that penetrates deep into the surface of the metal so that when moisture hits it again there is nothing left but shiny clean metal!

What is Gempler’s Rust Converter?

When you’re looking for one of the best rust solutions on the market you should consider Gempler’s Rust Converter, an ultimate one-step solution to convert rusted iron and steel surfaces that prevents further rusting.

It’s formulated for use on wrought iron, steel doors, dumpsters and railings which are the most susceptible to rusting. It penetrates deep into surfaces of metal so that when moisture hits again there is nothing left but clean shiny metal!

The product has been tested by a group of experts in its effectiveness as well as it safety. The formulation contains an acid solution that converts rusted surfaces protecting against further rusting.

Gempler’s Rust Converter can be applied over any type of paint job or other repairs without damaging them. This means you won’t have to pay more money just because your house needs extra protection from weather elements! If you do not want the hassle of applying another coating then this is the right solution as it works both as a primer and rust converter.

How to use the product

Gempler’s Rust Converter is very easy to apply. It comes in a one-quart jug that you can pour over the rusted metal surface and paint job. Be careful when pouring it so as not to get on other surfaces such as water or plants outside where the spilled liquid may cause unwanted damages.

GEMPLER’S Eco-Friendly Rust Converter and Primer - 1 Gallon Size
CHECK PRICE

The product should be applied at least twice each year if you want optimum protection from rusting which extends the life of your house, vehicle, boat or any other object for decades! The first application will stop new rust from forming before it becomes visible while the second coat gives all-around coverage and protects against future rusting. Another thing worth noting about this product is its ease of use without harmful side effects.

How long does Gempler’s Rust Converter take to dry?

The Gempler’s Rust Converter takes about an hour to dry.

As mentioned earlier in this article: “Gempler’s recommends that once fully dried, put a second coat to ensure complete transformation of rusty surfaces”. It is not uncommon for people to wait up to 24 hours before applying the second coat. If your object has been exposed to moist conditions such as rain or snow then allow at least 12-24 hours drying time between coats too.

If you’re feeling impatient after waiting what seems like forever (hey, who doesn’t!) feel free to speed things along by using a hairdryer set on low heat which will help evaporate any remaining moisture.

Can you apply body filler over rust converter?

If you’re looking to cover up your rust converter with something more permanent, say body filler or epoxy resin then the answer is yes. This will not affect the performance of Gempler’s in any way as long as it has been completely dried prior to application and there are no traces of moisture left behind on its surface.

Do you wash off rust converter?

You don’t need to wash off Gempler’s Rust Converter, but you might want to if it gets on a surface that will be difficult or impossible to paint.

It has been shown that when using the product with water-sensitive surfaces such as wood, washing is unnecessary and does not affect performance in any way (though this may depend on how much comes into contact). It can also be sprayed over previously painted surfaces without danger of damaging them. You should always try test first before applying all at once though!

If there are traces of moisture left behind then these must dry out for 12-24 hours before application which means more waiting time – yay!

Who owns Gempler’s

In January, Carl Atwell bought the company that makes products for farmers. He wanted to show people what they sell.

The results of using Gempler’s Rust Converter

So, our final result on applying Gemper’s Rust Converter on a rusted surface.  It was easy to apply, drying time is short and it did not smell bad.

To find the best rust converter for your needs, you need a good understanding of what type of conversion you’re looking for. There are many types on offer that vary in cost and effectiveness – some more than others!

While there has been no evidence shown by independent sources suggesting which product will be better or worse at removing rust from surfaces; we have found Gempler’s Rust Remover Converter to be affordable, effective without any particular risks associated with using this product when compared with competitors.

Who should buy this product? Recommendations

We recommend this product to homeowners and professionals.  Professionals should keep in mind that this product is cheaper than many of its competitors. The price point means it may not be as effective for high-volume jobs, or those with a large surface area to cover but the savings are worth it if you don’t need to do much rust removal work.

If homeowners want something more affordable and can deal without using an industrial-strength solution; Gempler’s Rust Converter will definitely fit the bill!  *These statements have been based on our own research and experience.*

Overall

We found Gempler’s Conversion to be one of the most cost-effective conversion products available online – especially when considering how much coverage you get from each 1-Quart application.

 

You might also enjoy

Homemade Jewelry Cleaners: How to Make Your Own and Get Sparkling Results
Say Goodbye to Rust: How to Stop a Car from Rusting
Basecoats: The Foundation of Excellent Painting

About Kurt Gorman

Kurt Gorman is a 43-year-old Auto Body Painter that prepares vehicles to be painted and apply paint coats for touch-up repairs or just to satisfy a customer's desire to change the car's color. Read More.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

About

Our main goal at RustConverters.net is to make helpful resources for everyone who wants to get rid of any kind of rust. At home or at the workshop, just anywhere.

AFFILIATE DISCLOSURE

Some posts may contain affiliate links. rustconverters.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Getting in Touch

Phone: +1(608)733-6577
Email:info@rustconverters.net
Hours: Mon — Fri: 9:00am – 5:00pm
Saturday – Sunday: 11:00am – 3:00pm

316 W Washington Ave #675
Madison, WI 53703, USA

  • Ask Us
  • Questions and Answers
  • About
  • Privacy Policy
  • Disclaimer
  • Contacts

Copyright © 2023 · rustconverters.net · ALL RIGHTS RESERVED

DMCA.com Protection Status